Broad range of sensors, CO2 meters, data loggers ,
portable instruments and monitoring systems

You have no items in your shopping cart.

Temp / R.H. / Atm.Druk Controller (ext. probe), 3x dig.input, 2x relay, Ethernet

Temp / R.H. / Atm.Druk Controller (ext. probe), 3x dig.input, 2x relay, Ethernet

  • Integrated sensors to measure temperature, R.H. and barometric pressure
  • 3 additional inputs to measure status
  • Wall mount enclosure with external probe (cable length 1m.)
  • Supplied with Ethernet interface and 2x relay output to control external devices
Sku

STRPE-104

Price

staffelprijzen op aanvraag

Availability: In stock

€795.00
Delivery

Bel ATAL 0299-630610

General

The SensoStat is a multi-sensor controller designed to switch/control heating, ventilation, humidifiers, dehumidifiers etc.

The SensoStat has integrated sensors to measure:
- Temperature
- Relative Humidity
- Barometric Pressure

Inputs (to measure status)
3x digital inputs

Outputs
2x relay
Ethernet

The SensoStat is standard supplied with two relays as alarm output or to control an external device. Each relay can be assigned to any measured or computed value.

Measured temperature and relative humidity is recalculated to other humidity interpretations - dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy.
Units of pressure reading are selectable: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2. Degrees Celsius and Fahrenheit are user selectable.

Parameters are easy adjustable from regulator keyboard or from the computer. Large dual line LCD for simultaneous display of temperature, pressure or relative humidity or other calculated humidity interpretation is an advantage.

State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. The SensoStat is designed for use in non-aggressive environment.
This SensoStat comes with three digital inputs for detection of two-state events - e.g. water, smoke, glass break detection, door contact.

SENSOSTAT APPLICATIONS

- building management and automation
- server rooms
- telecommunication devices
- warehouses, glasshouses
- wood- and paper industry
- museums, archives, galleries
- air-conditioned rooms, HVAC
- weather stations

Specifications

Output Ethernet
Measured Value Temperature + Relative Humidity + Atmospheric Pressure
Construction Type With T+RH Probe on Cable
Design Industrial
Temperature Measuring Range -30 to 105 °C
Relay Output Yes
Two-State Input Yes
Lcd Display Yes
PoE No
Relative humidity range 0 to 100%
Accuracy of relative humidity measurement ±2.5% relative humidity from 5 to 95% at 23°C
Accuracy of temperature output ±0.4°C
Maximum measuring pressure range 600 to 1100hPa
Accuracy ±1.3hPa at 23°C
Resolution 0.1°C, 0.1%RH, 0.1hPa
Measuring interval 2s
Available temperature units degrees Celsius, degrees Fahrenheit
Computed value dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Available pressure units hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2
Accuracy and range of dew point temperature output - for more details see graphs in manual ±1.5°C at ambient temperature T<25°C and RH>30%
range -60 to +80°C
Accuracy and range of absolute humidity output ±1.5g/m3 at ambient temperature T < 25°C
range 0 to 400g/m3
Accuracy and range of specific humidity output ±2g/kg at ambient temperature T < 35°C
range 0 to 550g/kg
Accuracy and range of mixing ratio output ±2g/kg at ambient temperature T < 35°C
range 0 to 995g/kg
Accuracy and range of specific enthalpy output ±3kJ/kg at ambient temperature T < 25°C
range: 0 to 995 kJ/kg
Temperature compensation of the humidity sensor all temperature range
Temperature operating range -30 to +80°C
IP protection IP40
Number of relay outputs 2
Maximum switching voltage, current and power of relay output 50V, 2A, 60VA
Number of binary inputs 3
Signal for binary inputs dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Minimum pulse length at binary input 500ms
Low voltage level 0 to +0.5V
High voltage level +3.0 to +30V
Audible alarm built-in beeper - switchable
LAN connection RJ-45 connector, 10Base-T or 100Base-TX
Communication protocols WWW, ModbusTCP, SNMPv1, SOAP
Alarm protocols E-mail (SMTP authentication is supported), SNMP Trap, Syslog
Configuration T-Sensor, Telnet, keyboard
Temperature operating range of LCD display readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Filtering ability of sensor cover 0.025mm - filter with stainless steel mesh
Power 9 to 30Vdc, maximum consumption 1W
Power connector co-axial, diameter 5.5 x 2.1mm
Length of the probe cable 1m, 2m or 4m optionally
Dimensions 136 x 159 x 45mm (W x H x D), probe length 88mm, probe diameter 18mm
Weight approximately 410g - 1m probe

Accesories

  1. Mounting accessory
    • Accessoire voor montage van gecombineerde temperatuur/relatieve vochtigheidssensoren in luchtkanalen
    ATS-AC10
    Price
    €10.00
  2. Mounting accessory
    • Assembling accessory for a combined temperature / humidity sensors against the wall.
    ATS-AC11
    Price
    €10.00
  3. Protection cap black
    • Black protection cap with stainless steel filter (0025mm)
    ATS-AC12B
    Price
    €20.00
  4. Protection cap grey
    • Gray protection cap with stainless steel filter (0025mm)
    ATS-AC12G
    Price
    €20.00
  5. Protection cap
    • Copper protection cap (0,025 mm)
    ATS-AC13
    Price
    €17.00
  6. Solar Radiation Shield
    • Protects sensor element in the outside air
    ATS-AC15N
    Price
    €250.00
  7. RH Calibration set
    • Complete RH calibration set
    ATS-AC16
    Price
    €199.00
  8. Power Supply
    • Suitable for the EPD-series temperature sensors (Ethernet, web-based)
    EPD-AC01
    Price
    €15.00
  9. Magnetisch deurcontact
    • magnetisch deurcontact
    • Verkrijgbaar in diverse kabel lengtes
    ATS-AC34
    Price
    €10.00
  10. Digitale water lekkage sensor
    • Watermelder voor gebruik met o.a. SensoStat serie
    • Voeding 12Vdc (via regelaar)
    • 3m lange kabel
    ATS-AC36
    Price
    €55.00
  11. Optische rookmelder
    • Rookmelder voor gebruik met o.a. SensoStat serie
    • Voeding 12Vdc (via regelaar)
    • Werkt ook op batterij voeding (3x 1,5 V AA)
    ATS-AC32
    Price
    €95.00
  12. Bewegingsdetector
    • P.I.R. bewegingsdetector
    • Geschikt voor o.a. SensoStat modellen
    • Gevoed door regelaar of externe voeding
    ATS-AC39
    Price
    €50.00
  13. Protection cap grey
    • Gray protection cap with stainless steel filter (0025mm)
    ATS-AC12P
    Price
    €50.00

Downloads

Reviews

Only registered users can write reviews. Please, log in or register