Broad range of sensors, CO2 meters, data loggers ,
portable instruments and monitoring systems

You have no items in your shopping cart.

Temperature Controller (ext. probe), 3x dig.input, 2x relay, Ethernet

Temperature Controller (ext. probe), 3x dig.input, 2x relay, Ethernet

  • External connection for Pt1000 temperature sensor
  • 3 additional inputs te measure status
  • Wall mount enclosure
  • Supplied with Ethernet interface and 2x relay outputs to control external devices



staffelprijzen op aanvraag

Availability: In stock


Bel ATAL 0299-630610


The SensoStat is a temperature controller designed to switch/control heating and ventilation devices. The SensoStat has external connection for Pt1000 temperature sensor.

Inputs (to measure status)
3x digital inputs

2x relay

The SensoStat is standard supplied with two relays as alarm output or to control an external device. Each relay can be assigned to any measured or computed value. Degrees Celsius and Fahrenheit are user selectable. Parameters are easy adjustable from regulator keyboard or from the computer. Large dual line LCD for simultaneous display of temperature.

This SensoStat comes with three digital inputs for detection of two-state events - e.g. water, smoke, glass break detection, door contact.


- building management and automation
- server rooms
- telecommunication devices
- warehouses, glasshouses
- wood- and paper industry
- museums, archives, galleries
- air-conditioned rooms, HVAC
- weather stations


Output Ethernet
Measured Value Temperature
Construction Type Ambient Air
Design Industrial
Temperature Measuring Range -30 to 80 °C
Relay Output Yes
Two-State Input Yes
Lcd Display Yes
PoE No
Accuracy of temperature output ±0.4°C
Resolution 0.1°C
Measuring interval 2s
Available temperature units degrees Celsius, degrees Fahrenheit
Temperature operating range -30 to +80°C
IP protection IP40
Number of relay outputs 2
Maximum switching voltage, current and power of the relay output 50V, 2A, 60VA
Number of binary inputs 3
Signal for binary inputs dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Minimum pulse length at binary input 500ms
Low voltage level at binary input 0 to +0.5V
High voltage level at binary input +3.0 to +30V
Audible alarm built-in beeper - switchable
LAN connection RJ-45 connector, 10Base-T or 100Base-TX
Communication protocols WWW, ModbusTCP, SNMPv1, SOAP
Alarm protocols E-mail (SMTP authentication is supported), SNMP Trap, Syslog
Configuration T-Sensor, Telnet, keyboard
Temperature operating range of LCD display readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Power 9 to 30Vdc, maximum consumption 1W
Power connector co-axial, diameter 5.5 x 2.1mm
Dimensions 136 x 191 x 45mm (W x H x D), stem length 53mm
Weight approximately 340g


  1. Power Supply
    • Suitable for the EPD-series temperature sensors (Ethernet, web-based)
  2. Magnetisch deurcontact
    • magnetisch deurcontact
    • Verkrijgbaar in diverse kabel lengtes



Only registered users can write reviews. Please, log in or register