Algemeen
-
Monitor the physical environment and receive alerts of any disturbances, such as unauthorized intruders, security breaches, high temperatures, smoke, water leakages, power outages and more.
Compatible with all of the ATAL range of Intelligent Sensors it provides a complete environmental, access control and security monitoring solution for up to 500 connected sensors.
The EthernetProbe 5E Standard has a Linux Operating System running an iMX25 CPU. An additional 2 Gigabytes SD card can be installed to provide greater storage capacity.
Networked Monitoring
It is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios.The EthernetProbe 5E Standard has an easy-to-use web-based user interface for sensor configuration, data collection and extensive graphing. Complete SNMP functions such including SNMP v3 encryption are supported.
The EthernetProbe 5E Standard also supports Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway.
The web-based interface is written in PHP allowing end-user changes such as language translation. The EthernetProbe 5E Standard has a battery backed time of day clock for accurate record keeping.
Sensors
Up to 8 of ATAL's Intelligent Sensors can be connected to the EthernetProbe 5E Standard Video. When plugged in, sensors automatically configure themselves and go 'online'. Using the either the E-sensor8, or the E-opto16 expansion modules, up to 500 sensors can be connected to a single unit. Up to 4 HD digital camera's can be connected trough high speed USB ports. Our easy-to-use port numbering system allows you to setup the EthernetProbe 5E Standard Video within minutes. Specificaties
-
Specifications
Dimension
- Size 8.5" x 5.43" x 1.80"
- 1U Rack Mount Standard
- Weight 1 Kg
Expansion Ports
- 4x RJ-45 Expansion Ports
- 115.2K BPS Data Transfer Rate
- Simultaneous functionality
between Expansion Ports &
RS485 port threshold status
Mounting
- Rack mount brackets included
- Compatible with AKCess Pro’s DIN and rack mount trays
Power Requirements
- Voltage 7.0 – 9 VDC, 3Amp
Status Indication
- LED indication for Power
- LED for Network Connectivity
- LED for sensor online and
threshold status
Output
- Ext. Speaker Out, 2.5” jack (Analog)
- Mic Out, 2.5" jack (Analog) (For modem application)
Inputs
- 8x RJ-45 Sensor Ports
- 4x RJ-45 Expansion Ports
- 1x USB 2.0 Modem Port
- Audio In (Analog) 2.5" jack
- RS485, 2 Pin Terminal box, (used for Modbus)
Operating Environment
- Temp : Min. -35° C - Max. +55° C
- Humidity : Min. 20% - Max. 80% (Non-Condensing)
Components
- Manufactured using highly integrated, low power surface mount technology to ensure long term reliability.
- CPU: AKCP i.MX25 Processor
- 128 MB On-Board NAND Flash
- HC SD Memory Slot on-board (up to 16GB
Power Consumption
- Typical 5.025 Watt, 0.67A
MTBF
- 400,000 Hours
Expansion Boards
- 8 Port Intelligent Sensors Module
(E-Sensor8) 16 Port Dry Contacts Module (E-opto16) (Maximum of 500 Sensors)
- Two Door, Door Control Unit (DCU) Extendable up to 1,000 Feet or 300 meters
- Expansion modules are daisy chainable
- Size 8.5" x 5.43" x 1.80"
Accessoires
-
-
- Connectivity with EthernetProbe EP5ES
- 3-phase monitoring
- Parameters: Total Active Power, Total Reactive Power, Active Power, Reactive Power, Phase Line Voltage, Phase Line Current and Power Factor
NP-PMS230-CT50Niet op voorraad
-
- Remote Temperatuursensor
- De AutoSense Temperatuursensor wordt automatisch herkent door de EthernetProbe
- De sensor wordt direct vanuit de EthernetProbe gevoed
- Wordt geleverd met 30cm UTP kabel (eenvoudig te verlengen)
NPR-TE-01Niet op voorraad
-
- Remote Temperatuur en R.V. sensor
- De AutoSense Temperatuur en R.V. sensor wordt automatisch herkent door de EthernetProbe
- De sensor wordt direct vanuit de EthernetProbe gevoed
- Wordt geleverd met 30cm UTP kabel (eenvoudig te verlengen)
NPR-TRH-01Niet op voorraad
-
- Waterlekkage-melder aan 4 meter kabel
- De AutoSense Waterlekkage-melder wordt automatisch herkent door de Ethernet- en VisionProbe
- De sensor wordt direct vanuit de Ethernet- en VisionProbe gevoed
- Andere kabellengtes zijn op aanvraag leverbaar
NP-WM-15Niet op voorraad
-
-
Reviews
Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren
